Lenze E82EV752K4C - Basic device installation

Contents
5
Basic device installation
5.1
L
5.1-1
EDS82EV903-1.0-11/2002
5 Basic device installation
5.1 Contents
5.1 Contents 5.1-1................................................................
5.2 Important notes 5.2-1...........................................................
5.3 Basic units in the power range 0.25 ... 2.2 kW 5.3-1....................................
5.3.1 Mounting with fixing rails (standard) 5.3-1...................................
5.3.2 Thermally separated mounting (push-through technique) 5.3-2....................
5.3.3 Mounting in ”cold plate” technique 5.3-6....................................
5.3.4 DIN rail mounting 5.3-8................................................
5.3.5 Lateral mounting 5.3-9.................................................
5.4 Basic units in the power range 3 ... 11 kW 5.4-1.......................................
5.4.1 Mounting with fixing rails (standard) 5.4-1...................................
5.4.2 Thermally separated mounting (push-through technique) 5.4-2....................
5.4.3 Mounting in ”cold plate” technique 5.4-4....................................
5.4.4 Lateral mounting 5.4-6.................................................
5.5 Basic units in the power range 15 ... 30 kW 5.5-1......................................
5.5.1 Mounting with fixing brackets and mains choke (standard) 5.5-1..................
5.5.2 Mounting with fixing brackets and footprint mains filter 5.5-2.....................
5.5.3 Mounting with fixing brackets and built-on mains filter 5.5-3.....................
5.5.4 Thermally separated mounting (push-through technique) 5.5-4....................
5.5.5 Mounting in ”cold plate” technique 5.5-5....................................
5.6 Basic units in the power range 45 ... 55 kW 5.6-1......................................
5.6.1 Mounting with fixing brackets and mains choke (standard) 5.6-1..................
5.6.2 Mounting with fixing brackets and footprint mains filter 5.6-2.....................
5.6.3 Mounting with fixing brackets and built-on mains filter 5.6-3.....................
5.6.4 Thermally separated mounting (push-through technique) 5.6-4....................
5.7 Basic units in the power range 75 ... 90 kW 5.7-1......................................
5.7.1 Mounting with fixing brackets and mains choke (standard) 5.7-1..................
5.7.2 Mounting with fixing brackets and footprint mains filter 5.7-2.....................
5.7.3 Mounting with fixing brackets and built-on mains filter (mounting variant 1) 5.7-3.....
5.7.4 Mounting with fixing brackets and built-on mains filter (mounting variant 2) 5.7-4......
5.7.5 Thermally separated mounting (push-through technique) 5.7-5....................
Show/Hide Bookmarks