EasyManua.ls Logo

Lenze E82EV752K4C - Activation of Password Protection

Lenze E82EV752K4C
588 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameter setting with the XT EMZ9371BC keypad
Activation of password protection
9
Parameter setting
9.4
9.4.6
L
9.4-8
EDS82EV903-1.0-11/2002
9.4.6 Activation of password protection
)
))
) Note!
l If the password protection is activated (C0094 = 1 ... 9999) only
theusermenucanbefreelyaccessed.
l To get into the other menus you must enter the password first.
l Please observe that also the password-protected parameters
will be overwritten when parameter sets are transferred to
other controllers. The password will be transferred, too.
l Do not forget your password! If you cannot remember the
password, it can only be reset via PC or a bus system.
Step Keys Action
1. Select the submenu 2.1 ”ALL in the
menu 2
zyZY
Change to the submenu ”ALL with the arrow keys
2. Change to the code level
Z
Display o f code C0001 ”Set pt setup
3. Select C0094
z
Display o f code C0094 ”User password”
4. Change to parameter level
V
Display ”0 (no password protection)
5. Set password
A)
z
Select password (1 ... 9999)
B)
TV
Confirm password
6. Change to the code level
A)
V
Display of operation level
B)
V
Display o f C0094 and ”User password”
7. Change to menu 1 ”USER menu”
YYy
The password protection is active now:
Every time you want to leave the user menu, ”Enter password” is displayed.
If you enter the correct password and confirm it with TVall menus are freely accessible again.
Step Keys Action
1. Leave the user menu
z
2. The password is demanded ”Enter password” is displayed
3. Enter password
A)
z
Enter stored password
B)
TV
Confirm password
4. Select the submenu 2.1 ”ALL in the
menu 2
Z
Change to the submenu ”ALL
5. Change to the code level
Z
Display o f code C0001 ”Set pt setup
6. Select C0094
z
Display o f code C0094 ”User password”
7. Change to parameter level
V
Display of ”-xxxxx” (password protection is active)
8. Reset password
A)
z
Enter ”0”
B)
TV
Confirm
9. Change to the code level
A)
V
Display of operation level
B)
V
Display o f C0094 ”User password”
The password protection has been cancelled now. All menus are freely available again.
Activation of password
protection
Cancel password protection
Show/Hide Bookmarks

Table of Contents

Related product manuals