Wiring the standard device 7
53
EDK94PNE36 DE/EN/FR/ES/IT 2.0
24 V supply
Terminal X11 Labelling Description
GE GND external supply
SSP9400X11
24E 24 V external supply through safely separated power supply unit
(SELV/PELV)
Terminal data
Conductor cross-section Tightening torque
[mm
2
] [AWG] [Nm] [lb-in]
Flexible
0.2 ... 2.5
24 ... 12 Spring terminal
With wire end
ferrule
Digital inputs and digital outputs
Terminal X12 Labelling Description
GOI GND digital out / in
DI1 Brake chopper input - for discharging after mains disconnection only
DO1 Mains OK
DO2 Brake chopper active
DO3 Short c ircuit in brake chopper
SSP9400X12
DO4 Heatsink overtemperature
Wire breakage in the NTC
Terminal data
Conductor cross-section Tightening torque
[mm
2
] [AWG] [Nm] [lb-in]
Flexible
0.2 ... 2.5
24 ... 12 Spring terminal
With wire end
ferrule
To Next Page
Loading...