Lenze EPZ Series - Preface and General Information

Preface and general information
These Instructions
EDK10203EZ3 DE/EN/FR 4.1
11

DUMMY_NUM_Reset−Ext−board−3_en
0Fig. 0Tab. 0
1 Preface and general information
These Instructions
ƒ contain the most important technical data, describe the installation, handling and
commissioning of the extension board III.
ƒ are only valid
– for the extension board III with the type designation EPZ−10203
– together with the Mounting Instructions for the Drive PLC.
Description
The extension board III extends the Drive PLC by um 8 digital inputs, 4 digital outputs, 2
analog inputs and 1 incremental encoder/ meter input.
Scope of application
Applicable together with the Drive PLC type EPL−10200−EI
Accessories
Items supplied
– two plug connectors, 2 x 13 pole each (already assembled at EPL−10203−EI)
– one 6−pole terminal strip for digital inputs (I9 ... I14)
– one 6−pole terminal strip for digital outputs (05 ... 08)
and digital inputs (I15, I16)
– one 6−pole terminal strip for output voltage (+024, ^24)
and analog inputs (A ^, AI4, AI5)