Mechanical installation
EDK10203EZ3 DE/EN/FR 4.1
14
H1_MechINS−inst_en
4 Mechanical installation
Stop!
During installation switch off the voltage supply for the Drive PLC!
Remove the protection cover from the
Drive PLC [1a] and keep it.
A
1a
Plug the plug connectors onto the
Extension Board [1b].
B
1b
Connect the Extension Board [1b] to the
Drive PLC [1a].
1a
1b
Assign the terminals of the Extension
Board.
PES: HF shield termination by PE
connection
PES
PES
To Next Page
Loading...