Mechanical installation
Transport
4
20
Lenze ¯ MA 12.0019 ¯ 6.1
G50AB045 ... G50BB124
g500−B45 ... g500−B240
G50BB145 ... G50BB243
g500−B450 ... g500−B4300
G50BB280 ... G50BB320
g500−B8000 ... g500−B20000
Fig. 2 Positioning of the eye bolt for transporting the complete drive system
) Note!
As standard, threads are delivered with plug screws. The plug can be
easily removed, e.g. by using a screwdriver blade. For the thread size and
load carrying capacity of the eye bolt, please see Tab. 1.
Eye bolt position
Thread
M6 M8 M10 M12 M16 M20 M24
80 140 230 340 700 1200 1800
£45°
−−−−− 100 170 240 500 860 1290
£45°
−−−−− 70 115 170 350 600 900
Tab. 1 Load carrying capacity of each eye bolt in kg
} Danger!
Completely screw in transport aids (such as eye bolts or bearing plates),
they must be flat and applied over their entire surface!
If possible, the transport aids (such as eye bolts or bearing plates) must
be stressed vertically in the direction of the screw axis! Angular tension or
tension to the sides reduces the payload! Observe the information
provided in DIN 580!
Use additional appropriate lifting aids, if required, to achieve a direction
of loading which is as vertical as possible (highest payload). Secure lifting
aids against shifting!
To Next Page
Loading...