Need help?Do you have a question about the Lenze i510 Series and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| Overload Capacity | 150% for 60 seconds |
| Enclosure Rating | IP20 |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Control Type | V/f control, vector control |
| Communication Interfaces | CANopen, Modbus RTU, EtherCAT, PROFIBUS, PROFINET |
| Ambient Temperature | -10°C to +50°C |
| Braking Resistor | Optional |
| Safety | STO (Safe Torque Off) |
| Protection Features | Overcurrent, overvoltage, undervoltage, overtemperature, short circuit |
| Output Voltage | 0 to input voltage |
| Input Voltage | 200-240 V, 380-480 V |
| Voltage Range | 200-240 V, 380-480 V |
| Frequency Range | 0 to 599 Hz |
Details of the inverter's physical components and connections.
Defines the qualified personnel required for product operation.
Specifies the intended use and limitations of the inverter.
Lists directives and standards the product complies with.
Outlines standards and regulations applicable to the operator.
Explains the product naming convention and coding.
Essential safety precautions for handling the inverter.
Explains the meaning and use of hazard warning symbols.
Identifies potential risks remaining after safety measures.
Lists applicable standards and environmental requirements.
Guidance on connecting the inverter to IT power systems.
Physical dimensions and mounting information for the inverter.
General diagram showing inverter terminal connections.
Guidelines for ensuring electromagnetic compatibility during installation.
Detailed description of terminal functions for control signals.
Information on the inverter's relay output terminals.
Connection and data for single-phase power supply.
Connection and data for 3-phase 230/240V power.
Connection and data for 3-phase 400V power.
Connection and data for 3-phase 480V power.
Description of the keypad and its connection.
Explains the function of each button on the keypad.
Illustrates how to navigate and use the keypad.
Method for fast setup using terminal connections.
Advanced wiring and parameter settings for terminal control.
How to operate the inverter using the keypad.
Using the EASY Starter software for setup.
Summary of the most critical configuration parameters.
Common parameters configurable as favorites.
Essential parameters for initial inverter setup.
Parameters for configuring motor operation.
Parameters for advanced inverter features.
How errors and faults are shown on the keypad.
Procedures for clearing error conditions.
List of error codes, descriptions, and remedies.
Explanation of the meaning of different LED patterns.
To Next Page
