Preface
About this Hardware Manual
Information provided by the Hardware Manual
1
12
EDS94SPP101 EN 10.2
1.2 About this Hardware Manual
1.2.1 Information provided by the Hardware Manual
Target group
This Hardware Manual is intended for all persons who install, commission, and adjust 9400
servo controllers.
Together with the catalog it forms the basis of project planning for the manufacturers of
machines and plants.
Contents
This Hardware Manual is meant as an addition to the Mounting Instructions included in
the scope of supply:
ƒ The features and functions are described in detail.
ƒ It provides detailed information on additional ranges of application.
How to find information
Each chapter forms a complete unit and informs you about an individual subject:
ƒ You therefore only have to read the chapter containing the information you need.
ƒ The Table of Contents and Index help you to find all information about a certain
topic.
ƒ Descriptions and data of other Lenze products (drive PLC, Lenze geared motors,
Lenze motors, ...) can be found in the corresponding catalogs, Operating Instructions
and Manuals. The required documentation can be ordered at your Lenze sales
partner or downloaded as PDF file from the Internet.
Tip!
Information and tools concerning the Lenze products can be found in the
download area at
www.lenze.com
To Next Page
Loading...
Need help?
General