Lenze M Series - Page 34

Electrical installation 6
Term inal box
Feedback system
6.4.5 Feedback system
Resolver
Terminal Designation Meaning
B1 +Ref Transformer windings
B2 -Ref
(reference windings)
B3 +VCCENP Supply: electronic
nameplate 1
B4 +COS Stator winding cosine
B5 -COS
B6 +SIN Stator winding sine
B7 -SIN
B8 Not assigned
R1 +KTY Thermal sensor KTY
R2 -KTY
1) Only for versions with electronic nameplate ENP.
Incremental encoder / sin/cos absolute value encoder with Hiperface
Terminal Designation Meaning
B1
+ Ub
Supply +
B2 GND Mass
B3 A Track A / + COS
B4 A Track A inverse / - COS
B5 B Track B / + SIN
B6 B Track B inverse / - SIN
B7 Z Zero track / + RS485
B8 Z Zero track inverse / - RS485
B10 Shield - housing Shield - incremental encoder
R1 +KTY
Thermal sensor KTY
R2 -KTY
EN
Sin/cos absolute value encoder with EnDat interface
Terminal Designation Meaning
B1
+ Ub
Supply + / + VCC ENP 1
B2 GND Mass
B3 A Track A
B4 A Track A inverse
B5 B Track B
B6 B Track B inverse
B7 Data Data EnDat interface
B8 Data Data inverse EnDat interface
B20 Cycle Clock pulse EnDat interface
B21 Cycle Clock pulse inverse EnDat interface
B22 UP sensor UP sensor
B23 0 V sensor 0 V sensor
B24 Shield Shield for housing of encoder
B25 Not assigned
R1 +KTY
Thermal sensor KTY
R2 -KTY
1) Only for versions with electronic nameplate ENP.
Lenze • BA 33.0006 • 3.0
35