2 Safety instructions
General safety instructions for drive components
2.1 General safety instructions for drive com ponents
А Danger!
Disregarding the follo w in g basic safety measures may lead to severe
personal injury and damage to m aterial assets!
1
Note!
Safety-related param eters o f safety encoders used can be obtained from
the SISTEMA database, the Lenze AKB (Application Knowledge Base) or
the data sheet of the encoder manufacturer.
• Lenze drive and autom ation com ponents ...
... m ust only be used for the intended purpose.
... m ust never be operated if damaged.
... m ust never be subjected to technical modifications.
... m ust never be operated unless com pletely assembled.
... m ust never be operated w ithou t the covers/guards.
... can - depending on their degree of protection - have live, movable or rotating parts
during or after operation. Surfaces can be hot.
• Transport and storage in a dry, low -vibration environm ent w ithout aggressive
atm osphere; preferably in the packaging provided by the m anufacturer.
- Protect against dust and im pacts.
- Observe clim atic conditions according to the technical data.
• Lenze drive and autom ation com ponents ...
... m ust only be used as intended.
... m ust never be com missioned despite noticeable damage.
... m ust never be technically changed.
... m ust never be com m issioned in an incom pletely m ounted state.
... m ust never be operated w ithou t the required covers.
... m ay have live, m oving or rotary parts during and after operation - corresponding
to their type of protection. Surfaces m ay be hot.
... m ust not be operated w ith large vibrations.
... m ust not be operated in the frequency range of a plant or the drive system.
• All specifications of the corresponding enclosed docum entation must be
observed.
This is vital for a safe and trouble-free operation and for achieving the specified
product features.
8
Lenze • BA 33.0006 • 3.0
To Next Page
Loading...
