Safety instructions 2
Application as directed
• O n ly qualified skilled personnel are perm itted to w ork w ith or on Lenze drive and
autom ation components.
According to IEC 60364 or CENELEC HD 384, these are persons ...
... w ho are fam iliar w ith the installation, assembly, comm issioning and operation of
the product,
... possess the appropriate qualifications for their work,
... and are acquainted w ith and can apply all the accident prevent regulations,
directives and laws applicable at the place of use.
2.2 Application as directed
Low -voltage machines are not household appliances, but are intended as com ponents
tha t are only applied for re-use for industrial or professional purposes in term s of
IEC/EN 61000-3-2.
They meet the requirem ents of the Low -Voltage Directive 2006/95/EC and the
harmonised standards o f the IEC/EN 60034 series.
It is permissible to use low-voltage machines w ith IP23 protection or less outdoors only
if special protective measures are taken.
Do not use the integrated brakes as fail-safe brakes. It cannot be ruled out that the
braking torque w ill be reduced due to disruptive factors that cannot be influenced.
• Drives
- . .. m ust only be operated under the operating conditions and power lim its
specified in this docum entation.
- . .. com ply w ith the protection requirem ents of the EC Low -Voltage Directive.
1
Note!
Generally, all products this docum entation is valid for meet the
requirem ents of the Low -Voltage Directive 2006/95/EC. Products that do
not meet the m inim um efficiencies o f the EU Directive 640/2009 (and
hence the ErP Directive 2009/125/EC), w ill not be CE-com pliant as of
16th June 2011 and thus do not receive a CE designation.
In that case, the product m ay o nly be used outside the EEA.
A n y other use shall be deemed inappropriate!
Lenze • BA 33.0006 • 3.0
9
To Next Page
Loading...
