Commissioning
Functional test
6
45
BA33.0001 E N 2.0
Enter function blocks used in the processing table
Code Setting Function block
C0465/32 5500 ARIT1
C0465/34 5900 PT1-1
C0465/35 10655 CMP2
C0465/36 10550 OR1
6.5 Functional test
ƒ
Check all functions of the drive after commissioning:
– Direction of rotation of the motor
If the motor does not rotate in the correct direction, exchange two phas es.
– Torque behaviour and current consumption
– Function of the feedback system
ƒ
In case of malfunctions or faults:
E
Ch. 8.
To Next Page
Loading...
