Product description
Overview of designs
Command Station
3
l
16
EDSIPCx7 EN 4.1
3.3.2 Command Station
A Command Station (CS) is a stand−alone operator station which is protected against dust
and splash water at each side. The flat housing features a mounting frame on the rear side,
which can be mounted on a support arm or a wall. For the flexible implementation of
individual operating concepts the system offers numerous options and extension
consoles.
Apart from the Industrial PCs CS 5800 − 9800, also mere monitor panels and Thin Clients
are available in this design, which can be connected as a monitor to a Cabinet PC.
Thin Clients (TC): A Thin Client terminal serves to represent and operate applications on a
remotely installed host computer via a network connection. For data transmission the
Microsoft® RDP (Remote Desktop Protocol) is used. As host computer a Windows® XP
system for an operating section or a Windows® server operating system for several
operating sections is used. All processes are carried out on the connected server, the Thin
Client only providing for the display of the graphics or of the input systems for operating
the application. The computing power of the client can therefore be kept accordingly low.
Monitor panel (DVI): A monitor panel is an operator terminal to use remote Industrial PCs
as a built−in variant or stand−alone terminal. Like the command station devices, they
feature corresponding front modules and add−on components.
Type CS 5800 − 9800 CS 5800 − 9800 TC CS 5000 − 9000 DVI
Function IPC Thin Client Monitor panel
Screen diagonal 38.1 cm (15") or 48.3 cm (19")
Current supply DC 24 V ±25%
Uninterruptible power
system (UPS)
Optionally via ACU UPS control unit −
Cooling With fan
MC card slots 1 1 −
MC card ^ 29 − −
Configurable Yes No No
Interfaces
3 x USB type A
1 x USB type A front panel (opt.)
1 x/2 x USB type A in mounting frame (opt.)
1 x PS/2
1 x RS232
1 x LAN (10/100 Mbps)
2 x USB type A
1 x USB type A front panel
(opt.)
1 x USB type B
1 x DVI
1 x LAN (10/100 Mbps)
Enclosure IP65
Backup
If Windows® CE 6.0 is
used: backup and restore
tool V2
− −
To Next Page
Loading...
