Lenze MP 800 DVI - Accessories; Overview

Product description
Accessories
Overview
3
l
29
EDSIPCx7 EN 4.1
3.8 Accessories
3.8.1 Overview
Accessories Function For the use with
MC−CAN2 For connection to a CAN fieldbus;
the card features 2 independent
CAN interfaces
l IPC 3241 C
l IPC CPC 2800
l IPC CS 5800 − 9800
l IPC EL 1800 − 9800
MC−ETC For connection to a EtherCAT
network
l IPC 3241 C
l IPC CPC 2800
l IPC CS 5800 − 9800
l IPC EL 1800 − 9800
MC−ETH For connection to a Ethernet
network
l IPC 3241 C
l IPC CPC 2800
l IPC CS 5800 − 9800
l IPC EL 1800 − 9800
MC−ISI For the connection to RS 232,
RS 422, or RS 485; the card has 2
independent serial interfaces
l IPC 3241 C
l IPC CPC 2800
l IPC CS 5800 − 9800
l IPC EL 1800 − 9800
MC−PBM For connection to a PROFIBUS
system as master
l IPC 3241 C
l IPC CPC 2800
l IPC CS 5800 − 9800
l IPC EL 1800 − 9800
MC−PBS For connection to a PROFIBUS
system as slave
l IPC 3241 C
l IPC CPC 2800
l IPC CS 5800 − 9800
l IPC EL 1800 − 9800
MC−PNC For connection to a PROFINET
system as control system (controller
interface connection)
l IPC 3241 C
l IPC CPC 2800
l IPC CS 5800 − 9800
l IPC EL 1800 − 9800
MC−PND For connection to a PROFINET
system as device (device interface
connection)
l IPC 3241 C
l IPC CPC 2800
l IPC CS 5800 − 9800
l IPC EL 1800 − 9800
DVI/USB extender For the decentralised configuration
between the computer unit and the
operating/display unit
l Monitor panel MP 800 − 9000 DVI
l Monitor panel CS 5000 − 9000 DVI
l IPC 3241 C
l IPC CPC 2800
l IPC CPC 5100
l IPC CPC 9100
, For further information please see the corresponding separate manuals.