SM01M 2
1 GENERAL
1.1 Products Covered in This Manual
This manual covers the AC Tech SCL and SCM Series Variable Frequency Drives.
1.2 Product Changes
AC Technology Corporation reserves the right to discontinue or make modifications to the
design of its products without prior notice, and holds no obligation to make modifications
to products sold previously. AC Technology Corporation also holds no liability for losses
of any kind which may result from this action. Instruction manuals with the most up-to-date
information are available for download from the AC Tech website (www.actech.com).
1.3 Warranty
AC Technology Corporation warrants the SCL/SCM Series AC motor control to be free of
defects in material and workmanship for a period of 24 months from the date of shipment
from AC Tech's factory. If, under normal use, an SCL/SCM motor control becomes defective
within the stated warranty time period, contact AC Technology's Service Department for
instructions on obtaining a warranty replacement unit. AC Technology Corporation reserves
the right to make the final determination as to the validity of a warranty claim, and sole
obligation is to repair or replace only components which have been rendered defective
due to faulty material or workmanship. No warranty claim will be accepted for components
which have been damaged due to mishandling, improper installation, unauthorized repair
and/or alteration of the product, operation in excess of design specifications or other
misuse, or improper maintenance. AC Technology Corporation makes no warranty that its
products are compatible with any other equipment, or to any specific application, to which
they may be applied and shall not be held liable for any other consequential damage or
injury arising from the use of its products.
This warranty is in lieu of all other warranties, expressed or implied. No other person,
rm or corporation is authorized to assume, for AC Technology Corporation, any
other liability in connection with the demonstration or sale of its products.
1.4 Receiving
Inspect all cartons for damage which may have occurred during shipping. Carefully
unpack equipment and inspect thoroughly for damage or shortage. Report any damage
to carrier and/or shortages to supplier. All major components and connections should be
examined for damage and tightness, with special attention given to PC boards, plugs,
knobs and switches.
1.5 Safety Information
Some parts of AC Tech controllers can be electrically live and some surfaces can be hot.
Non-authorized removal of the required cover, inappropriate use, and incorrect installation
or operation creates the risk of severe injury to personnel or damage to equipment. All
operations concerning transport, installation, and commissioning as well as maintenance
must be carried out by qualified, skilled personnel familiar with the installation, assembly,
commissioning, and operation of variable frequency drives and the application in which
the drive is used.
To Next Page
Loading...
Need help?
General
