Immersive Audio System Installation
STEP 1: Lift the head and foot end of the bed by remote control. STEP 2: Pull the audio system cables and DC power cord toward the
direction of either bedstand through the bottom or the side of the bed frame.
WARNING — Ensure wires are below the metal frame and not between the
wood deck and metal frame.
Audio System Cable 2
Audio System Cable 3
Take out all the accessories from the immersive audio system box.
IMMERSIVE AUDIO SYSTEM BOX:
×1
AC Power Cord
of
Audio System
×1
Power Supply of
Audio System
×1
Audio
Controller
×1
Immersive Audio
System Box
DC Power Cord
of Audio System
Audio System Cable 1
To Next Page
Loading...
