Need help?Do you have a question about the Lesco Commercial plus 705698 and is the answer not in the manual?
Diagram of the hopper assembly with numbered parts for identification.
Detailed list of all parts for the hopper assembly, including part numbers and quantities.
Diagram illustrating the spreader frame with its components.
Comprehensive list of parts for the spreader frame assembly.
Exploded view diagram of the shut-off mechanism.
Detailed parts list for the shut-off assembly.
Step-by-step guide for installing the optional remote deflector onto the spreader.
Important notes for adjusting pivot points for optimal operation.
Instructions for installing the optional remote 3rd hole slide.
List of parts required for the 3rd hole slide assembly.
Instructions for assembling the primary components of the rotary spreader.
Specific guidance on attaching the handle and operating lever.
Detailed steps to calibrate the spreader for accurate product application.
Method for checking and ensuring even product spread.
Guidance on setting the correct application rate for different products.
Instructions for utilizing Lesco calibration gauges for fine-tuning.
Practical advice for efficient and safe spreader operation.
Information detailing what the warranty covers and its limitations.
Instructions for contacting LESCO service for warranty issues.
Procedure for ordering replacement parts for the spreader.
To Next Page
General
