Need help?Do you have a question about the Leslie 2101 and is the answer not in the manual?
General| Channels | 3 |
|---|---|
| Rotors | 1 |
| Inputs | 1/4" Jack, 11-pin Leslie Connector |
| Outputs | 1/4" Jack |
| Controls | Volume |
| Rotation | Slow/Fast |
Details connecting the Leslie to a single-channel Hammond Organ via 11-pin cable.
Explains connecting the Leslie to specific Hammond models via 11-pin.
Describes connections for XM-1 and XB-1 models using an 8-pin cable.
Outlines how to connect audio signals via the ROTARY IN jack.
Guides connection of a Leslie 2121 Stationary-Unit to a Horn-Unit.
Details setting up two Stationary-Units for stereo sound.
Explains linking multiple Horn and Stationary-Units for a system.
Details on the various input/output ports and connectors on the Leslie speaker's back panel.
Explanation of the buttons, knobs, and display on the Leslie speaker's front panel.
Historical overview of the development and sound principles of the Leslie Speaker.
Explains the importance and function of Leslie speaker rotor speed controls.
Control Horn and Low Rotor speeds, rise, fall, and brake times for nuanced sound.
Adjust microphone placement, rotor direction, horn resonance, and crossover for desired tone.
Configure MIDI channels, receive control data, and manage data dumps for external control.
Set up modes and control codes for Slow/Fast and Preset foot switches.
To Next Page
