Need help?Do you have a question about the Leslie 2102 and is the answer not in the manual?
General| Configuration | 2-way |
|---|---|
| Rotary Horn | Yes |
| Rotary Drum | Yes |
| Channels | 1 |
| Type | Rotary Speaker System |
| Amplifier Power | 100 Watts |
| Dimensions | 19.5" D |
| Woofer Size | 15" |
| Inputs | 1/4" TS, XLR |
| Controls | Speed |
Describes how to connect the Leslie to a single-channel Hammond Organ via an 11-pin cable.
Details connecting the Leslie to specific Hammond Organ models using the 11-pin interface.
Explains connections for XM-1 and XB-1 models using the 8-pin interface.
Describes how to connect instruments to the Leslie's ROTARY IN jack.
Instructions for connecting the Leslie 2121 Stationary-Unit to the main horn unit.
Guide for setting up two Stationary-Units to achieve stereo separation.
Explains how to connect multiple Leslie Horn-Units to Stationary-Units for system expansion.
Details the ports and controls located on the Leslie Control Center on the back panel.
Provides historical context and development of Leslie speakers.
Explains the importance and function of Leslie speaker speed controls.
Details how to adjust the slow speed settings for the Horn or Low Rotor.
Explains how to adjust the fast speed settings for the Horn or Low Rotor.
Covers adjusting the time it takes for rotors to speed up or slow down.
Instructions for setting rotor brake time and direction (clockwise/counter-clockwise).
Adjusting horn resonance and the frequency split between horn and low rotors.
Simulating microphone placement effects for the Low Rotor.
How to simulate the resonance of a Leslie Model 122 speaker cabinet.
Setting up MIDI control and program channels for external control.
Configuring MIDI modulation wheel and expression pedal for rotor speed control.
Setting the mode and control code for the Slow/Fast foot switch.
Procedures for sending and receiving MIDI data via dump for presets.
Setting the operating mode for the Preset Foot Switch.
Instructions on how to restore the Leslie Speaker to its factory default settings.
Guide on how to control Leslie's advanced features using MIDI from an external instrument.
Specific notes on connecting older Hammond organs like XB-2, XB-5, and A-205 via MIDI.
Explains MIDI Control Change messages for parameters like Leslie Speed.
To Next Page
