To Next Page
S
Steven FrenchSep 16, 2025
What does 'OVER [P] NO.' mean on my Letatwin Printer?
- BBrittany MendozaSep 16, 2025
Only 5 pitch length settings can be set in a document.
What does 'OVER [P] NO.' mean on my Letatwin Printer?
Only 5 pitch length settings can be set in a document.
What to do if my Letatwin MAX LM-550A/PC BS Printer is printing poorly on tape?
If you're experiencing poor printing quality on tape, consider these potential solutions: * Check the position of the M roller lever. * Ensure the tape and ink ribbon are properly set. * Verify the tape width setting is correct. * Make sure there's no dirt or stains on the tape. * If the ambient temperature is below 15°C or above 35°C, try adjusting the “PRINTING DENSITY” in the OPTION menu. * Ensure the feeding roller is clean and no tape or tube waste is caught in the exit. * Adjust the “CUTTING POSITION” in the OPTION menu.
Why is half cutting not working on my Letatwin MAX LM-550A/PC BS?
If the half cutting function isn't working correctly, check the following: * Ensure the half cutter is properly set and the “Half cutting depth adjustment lever” is in the correct (TUBE) position. * If the cutter has been used for more than 5,000 cuttings, replace it. * Make sure you are using the exclusive half cutter LM-HC340 (yellow color). * Check for any tape or tube waste caught in the exit.
How to fix 'OVER PRINTING LENGTH' error on Letatwin Printer?
To resolve the 'OVER PRINTING LENGTH' error, try the following: * Reduce the character space, character width, margin, or number of characters. * Change the character size to a smaller size. * Alternatively, change the print length to a longer length.
What does 'P/LENGTH IS SAME AS LEFT [P]' mean on my Letatwin Printer?
If pitch length is same as the preceding pitch length, pitch length does not need to be newly set.
What does 'NO EVEN NUMBER WITHIN THE RANGE' mean on my Letatwin MAX LM-550A/PC BS Printer?
Reset the start and end values or select [ALL].
How to fix 'ERROR IN HALF CUT OPERATION' on Letatwin Printer?
To resolve an 'ERROR IN HALF CUT OPERATION', feed the printed material or replace the half cutter unit.
Why can I 'SET ONLY ONE [N]' on my Letatwin MAX LM-550A/PC BS Printer?
In [NORMAL PRINT MODE], only one sequential number can be set in a file.
What to do if Letatwin Printer displays 'OVER THE NUMBER OF COPIES'?
If your printer displays 'OVER THE NUMBER OF COPIES', simply reduce the number of copies you are trying to print.
How to troubleshoot 'OVER PITCH LENGTH' error on Letatwin MAX LM-550A/PC BS Printer?
To address the 'OVER PITCH LENGTH' error: * Change the “PITCH LENGTH”. * Reduce the character space, character width, or number of characters. * Change the character size to a smaller size.
Explains symbols and indications for safe operation.
Critical warnings for electrical shock, fire hazards, and mechanical safety.
Cautions on data saving, power, placement, and handling.
Instructions for pitch printing on tubes.
Details on setting character size.
Setting pitch length for tube and tape.
Setting total printing length.
Setting left and right margins.
Settings for print density, low temp mode, and feeding tube head.
List of error messages and countermeasures.
General| Print Method | Thermal transfer |
|---|---|
| Resolution | 300 dpi |
| Power Supply | AC 100-240V, 50/60Hz |
| Weight | 2.5 kg |
| Interface | USB 2.0 |
| Tape Width | 5mm, 9mm, 12mm |
| Printing Characters | Alphanumeric, symbols |
| Character Sizes | 2, 3 mm |
