Letatwin MK9-USB - User Manual

Questions and Answers

L
Lynn ThompsonAug 19, 2025
What to do if my Letatwin Printer shows 'NO COPIED DATA'?
- C
  Caleb GainesAug 19, 2025
  If your Letatwin Printer displays 'NO COPIED DATA', ensure you perform the “PASTE” function after using the “COPY” function. Keep in mind that any copied data will be lost if the power is turned off.
P
phendersonAug 21, 2025
What to do if Letatwin MK9-USB displays 'OVER COPY CAPACITY'?
- E
  Erik HaynesAug 21, 2025
  If the Letatwin Printer shows 'OVER COPY CAPACITY', copy blocks containing less than 50 characters.
M
Mary BerryAug 25, 2025
What does 'UNUSUAL POSITION' mean on my Letatwin Printer, and how to fix it?
- J
  Jose MasonAug 25, 2025
  If your Letatwin Printer displays 'UNUSUAL POSITION', move the cursor to a normal position.
M
mckinneytammyAug 26, 2025
Why does my Letatwin MK9-USB say 'OVER INPUT CHARACTER NO.'?
- K
  Kevin ElliottAug 26, 2025
  The 'OVER INPUT CHARACTER NO.' error on your Letatwin Printer means that you're trying to input more than 5,000 characters per file.
J
jeffreymarshallAug 28, 2025
What does 'OVER INPUT LINE NO.' mean on Letatwin MK9-USB?
- C
  Craig SmithAug 28, 2025
  The 'OVER INPUT LINE NO.' message on your Letatwin Printer indicates that you have exceeded the maximum of 4 lines. Delete text from the excess lines.
P
Peter WilliamsAug 30, 2025
What does 'NO WORD IN THIS BLOCK' mean on Letatwin MK9-USB Printer?
- D
  Derek RiosAug 30, 2025
  If your Letatwin Printer displays 'NO WORD IN THIS BLOCK', copy a block that contains some text.
S
smithmariaSep 1, 2025
Why does my Letatwin MK9-USB show 'OVER INPUT BLOCK NO.'?
- C
  Crystal DanielSep 1, 2025
  The 'OVER INPUT BLOCK NO.' error on your Letatwin Printer means that you're trying to input more than 300 blocks per file.
C
Carol BakerSep 3, 2025
What does 'OVER [P] NO.' mean on my Letatwin Printer?
- P
  perezbenjaminSep 3, 2025
  The 'OVER [P] NO.' message on your Letatwin Printer indicates that you're trying to set more than 5 pitch length settings in a document.
C
Claire PetersSep 5, 2025
What does 'UP TO 1PC. IN EACH BLOCK' mean for Letatwin Printer?
- S
  Shawn RiveraSep 5, 2025
  The message 'UP TO 1PC. IN EACH BLOCK' on your Letatwin Printer indicates that only one sequential number can be set in one block.
C
Courtney HerreraSep 7, 2025
What does 'DELETE OTHER [P] FIRST' mean on Letatwin MK9-USB Printer?
- B
  Brandon BaxterSep 7, 2025
  If your Letatwin Printer displays 'DELETE OTHER [P] FIRST', delete all the other [P] markers before deleting the first [P] marker.