Fel! Använd fliken Start om du vill tillämpa 見出し 1 för texten som ska visas här.
58
7-3 CONTINUE PRINTING AFTER THE CONSUMABLES RUNNING OUT
When the consumables, such as TUBE and/or INK RIBBON, run out during printing, it is
possible to continue printing after replacing them with new ones.
1. During the printing, when the consumables, such
as TUBE and/or INK RIBBON run out, the
following message appears on the screen.
2. Replace the used consumable with new one.
3. Press ENTER to continue printing.
Note: When continue printing, the one last printed
block might be printed again, to prevent
incompletely printed block.
Ｕ Ｎ Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｄ Ｂ Ｌ Ｏ Ｃ Ｋ Ｓ
Ｒ Ｅ Ｍ Ａ Ｉ Ｎ Ｉ Ｎ Ｇ
Ｃ Ｏ Ｎ Ｔ Ｉ Ｎ Ｕ Ｅ Ｐ Ｒ Ｉ Ｎ Ｔ Ｉ Ｎ Ｇ ？
Ｙ Ｅ Ｓ Ｎ Ｏ
To Next Page
Loading...
