Letatwin MK9-USB User Manual

Fel! Använd fliken Start om du vill tillämpa 見出し 1 för texten som ska visas här.
40
6-6 VERTICAL
Setting to print the texts in the vertical orientation.
Note: The printed result varies depending on the selected “PRINT MODE.”
You can select “PRINTING DIRECTION” according to the following table.
PRINT MODE MATERIAL HORIZONTAL VERTICAL
PITCH PRINT
Tube
Tape
NORMAL PRINT Tape
1. Press SHIFT → C/SPC (VRT). The [VERTICAL
setting screen] appears.
2. Press / key to select.
3. Press ENTER .
Note: ● Both of “VERTICAL” and “HORIZONTAL” cannot be set in a same document.
● If the error message (“SIZE-OVER”) appears, check the size of the material, character
size, and the number of lines. (See 9-1: ERROR MESSAGE LIST)
6-7 REPEAT
Setting the number of multiple copies of a particular block.
Ａ１ ＣＯＭ Ｕ１
Ａ１ ＣＯＭ ＣＯＭ ＣＯＭ Ｕ１
COM
COM
COM
“REPEAT” = 1pc.
“REPEAT” = 3pcs.
Selectable items: YES (vertical), NO (horizontal)
COM
C
O
M
C
O
M
Setting range: 1～100pcs.
［ Ｖ Ｅ Ｒ Ｔ Ｉ Ｃ Ａ Ｌ ］
Ｙ Ｅ Ｓ Ｎ Ｏ
Ｙ Ｅ Ｓ ＝ Ｖ Ｅ Ｒ Ｔ Ｉ Ｃ Ａ Ｌ
Ｎ Ｏ ＝ Ｈ Ｏ Ｒ Ｉ Ｚ Ｏ Ｎ Ｔ Ａ Ｌ
［ Ｖ Ｅ Ｒ Ｔ Ｉ Ｃ Ａ Ｌ ］
Ｙ Ｅ Ｓ Ｎ Ｏ
Ｙ Ｅ Ｓ ＝ Ｖ Ｅ Ｒ Ｔ Ｉ Ｃ Ａ Ｌ
Ｎ Ｏ ＝ Ｈ Ｏ Ｒ Ｉ Ｚ Ｏ Ｎ Ｔ Ａ Ｌ

Letatwin MK9-USB Specifications

General

Brand	Letatwin
Model	MK9-USB
Category	Printer
Language	English