Sliding Gate Motor – User’s Installation Manual
Letron Auto Gate (Australia) Pty. Ltd. Page 12 of 14
Maintenance
• All maintenance should be carried out by qualified personnel.
• Clean and lubricate any moving components.
• In case of rust, use some grease on it.
• Ensure that the slider gate is always well balanced.
• Ensure there are not binding / sticking of the gates which can falsely trigger the
obstruction sensing unit.
• Regularly test the slider gate motor to ensure that the obstruction sensor unit is
operating properly.
• Spare parts can be purchased directly from our factory.
To Next Page