Sliding Gate Motor – User’s Installation Manual
Letron Auto Gate (Australia) Pty. Ltd. Page 9 of 14
3.Confirm the Close and Open LED
4.Force Adjustment (sensitivity)
Because of the obstruction sensing function of this Gate Opener, sensitivity adjustment may be
required to allow for the effect of weather conditions
(such as windy locations). Increasing
TORQUE will decrease the sensitivity of the system.
The torque supplied to each motor can be
adjusted independently (for situations where gate sizes
or conditions vary). Turn dials anti
clockwise to increase sensitivity. Turn dials clockwise
to increase motor torque if the gates reverse
due to weather variables.
When an obstruction is detected, the Gate Openers will
reverse (when closing) or stop (when
opening).
Please note – Heavy Gates may not open or close fully
when the Torque dial is in the minimum
position.
If the gates close and open itself, the force adjustment is not right. Increase the force
adjustment.
To Next Page
Loading...