- 4 -
Night Light
Tap the metal speaker grill to turn on / off the night
light. If you want to increase / decrease the brightness
of the night light, press or hold the "+" or "-" button.
Restoring Factory Default Settings
1) Disconnect the device from the power source.
2) Hold the "T" button and then connect the device to
the power source.
3) The device will restore to factory settings after 3
seconds and you hear a voice prompt "Factory
Recovery".
● Model: T126L
● Adapter Input: 100-240V ~ 50/60Hz
● Adapter Output: 5V
⎓ 1.0A
● Device Working Voltage: DC 5V
● Device Working Power: <3 Watts
● Working Temperature Range: -10℃ to 50℃
Specifications
To Next Page
Loading...