10
FOG MODE
The Fog Mode is best used in foggy/rainy
conditions to screen out false readings from
raindrops or other atmospheric interference to
provide an accurate range. Fog Mode changes
the algorithm to look for the "last" object ranged.
When Fog Mode is on, the user will need to
range the base of the flag or lip of the green to increase ranging
accuracy. Turn Fog mode off when weather conditions are ideal.
TO ACTIVATE FOG MODE:
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 2 seconds to enter the Quick
Set Menu; release the MODE button, the word “Fog” will now
appear in the upper display.
3) While the word “Fog” is displayed, press and release POWER
as necessary until the word “On” is displayed in the lower
portion of the display.
4) To save the changes and return to ranging mode, let the unit
sit idle for at least 30 seconds until an automatic power-
down occurs, or simply press and hold MODE for at least
2 seconds. To continue through the Quick Set Menu and
manipulate another function, press and release MODE until
the appropriate icon is displayed.
in
cm
M
Y
ft
L
O
S
C
L
U
B
T
G
R
To Next Page
Loading...
Need help?
General
