23
produce an audible beep and the Prism Lock
icon will be shown in the upper right portion
of the display. The audible beep can be turned
on/off utilizing the Quick Set Menu. Simply
toggle through the functions using the MODE
button until “bEEP” is shown in the display.
Press and release POWER to select on or off.
Press and release MODE to save your current
settings and exit the set up menu.
Press and release POWER to select on or off.
Press and release MODE to save your current settings and exit
the set up menu.
NOTE: Prism Lock only works in Scan Mode while pressing and
holding the POWER button.
TROUBLESHOOTING
HOW DO I ACTIVATE THE INCLINOMETER?
TGR must be activated, at which time the inclinometer will be
activated automatically.
in
cm
M
Y
ft
L
O
S
C
L
U
B
T
G
R
To Next Page
Loading...
Need help?
General
