24
HOW DO I RESET THE UNIT TO FACTORY SETTINGS?
Press and hold POWER and MODE simultaneously for at least
10 seconds.
CAN I USE TGR WITHOUT MANUALLY INPUTTING DISTANCES
FOR AN 8, 6, OR 4-IRON?
Yes, TGR can be used without entering the Club Selector values,
it will simply use the default settings appropriate for the average
player. Entering your specific values will improve accuracy up
to one club length.
PRISM LOCK ISN’T WORKING (NO AUDIABLE BEEP):
Prism Lock only works when in Scan Mode. By pressing and
holding POWER you will get constant updated distance readings
until the laser hits the prism.
CLEANING/MAINTENANCE
Blow away dust or debris on lenses, or use a soft lens brush (such
as the one found on the Leupold LensPen). To remove fingerprints,
water spots or tougher dirt, use a soft cotton cloth or the cleaning
end of the Leupold LensPen. A lens tissue with lens cleaning fluid
may be used for more stubborn dirt. Always apply cleaning fluid to
the cleaning cloth, never directly to the lenses.
To insert a new battery, remove the battery cover (shown in
To Next Page
Loading...
Need help?
General
