8
The GX-6c has two buttons: POWER and MODE. When you
initially press the POWER button, the display is activated and the
unit is ready for ranging. Press the POWER button a second time
to range, or press and hold the POWER button to scan. Scanning
automatically updates the display. When ranging long distances
without a steady rest, you can easily differentiate the pin from
other potential targets behind it.
When you press and hold the MODE button for 2 seconds
and then release it, the Quick Set Menu is activated. To set or
activate a mode, you must advance to that function by pressing
the MODE button until that function is displayed. To activate or
manipulate a function, press the POWER button as necessary. If
this is the last function to be set, allowing the rangefinder to sit
idle for 30 seconds will cause an automatic power-off, saving all
MODE BATTERY
FOCUS
POWER
TGR INDICATOR
To Next Page
Loading...
Need help?
General
