15
MANUALLY INPUT THE DAY OF PLAY ALTITUDE:
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 2 seconds to enter the
Quick Set Menu.
3) Verify that TGR is turned on; if TGR is not activated, you will
not be able to enter the current altitude. See “To Activate
TGR”.
4) Press and release MODE until “Alt” is displayed.
5) While the altitude is flashing, press and release POWER
to change the current altitude setting to match current
conditions; each depression of POWER will increase the
altitude setting by 500 feet until 9999 has been reached,
at which time the setting will return to 0 and begin
increasing again.
6) To save the changes and return to ranging mode, let the unit
sit idle for at least 30 seconds until an automatic power-down
occurs, or simply press and hold MODE for at least 2 seconds.
To continue through the Quick Set Menu and manipulate
another feature, press and release MODE until the appropriate
icon is displayed.
To Next Page
Loading...
Need help?
General
