24
SELECTABLE RETICLES
This mode is used to choose from any one of 3 preloaded aiming
reticles for your GX digital laser rangefinder.
HOW TO CHOOSE A PARTICULAR AIMING RETICLE/
CROSSHAIR:
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 2 seconds and then release
to enter the Quick Set Menu.
3) Press and release MODE repeatedly until the reticle is flashing.
4) While the reticle is flashing, press and release POWER.
5) Continue pressing and releasing POWER until the desired
reticle is flashing. Press MODE to save the changes.
AVAILABLE RETICLES
Circle-Cross Reticle
Circle Reticle
Cross Reticle
To Next Page
Loading...
Need help?
General
