Leupold GX Series User Manual

12
FUNCTION 2: CURRENT TEMPERATURE INPUT (GX-II ONLY)
Temperature is one of the factors used to determine
TGR ranges; inputting the current temperature will
increase the accuracy of your TGR measurement. The
default temperature setting is 75 degrees F. After
activating TGR, the last saved temperature will be
flashing in the bottom portion of the display. Press
POWER to set the temperature to match the current
conditions; each depression of POWER will increase the
temperature setting by 5 degrees. The total range of available temperature
settings is 30 degrees to 120 degrees F. Press MODE to save your setting and
move to the next function.
NOTE: If yards is selected, the temperature will automatically be measured in
Fahrenheit. If meters is selected, the temperature will be measured in Celsius.
2
3
4
5
6
7
8
9
P

Leupold GX Series Specifications

General

Magnification	6x
Display Type	LCD
Waterproof	Yes
Fogproof	Yes
Battery Type	CR2
Measurement Range	5-800 yards