levante-products.com LEV0608bb/Page 7 of 12/Issue 1/06.19
PROGRAMMING THE UNIT
6. Repeat steps 3-5 until all days/block of
days have been programmed.
7. Wait 15 seconds to automatically confirm
or press the
Home button. Move the
slider to RUN to return to Run Mode.
N.B. The copy button can be used in the 7
day setting to copy any chosen day to
the next day (e.g Mon to Tues or Sat to
Sun). Simply change the program for
that day, then push copy repeatedly until
all 7 days (if you so wished) have been
changed.
Setting the Hot Water Programme
1. Move the slider to HW. Choose between
5/2, 7 day or 24hr programmer operation
(see page 6)
2. Press the Next
button. Press the Day
button until the desired day/block of days
you want to programme is flashing.
3. The display shows the 1st ON time.
Press +/– to set the time (10 minutes
increments). Press the Next
button.
4. The display shows the 1st OFF time.
Press +/– to set the time (10 minutes
increments). Press the Next
button.
5. The display will now show the 2nd ON
time. Repeat steps 3-4 until all remaining
ON/OFF periods have been set. On the
last OFF period, press the Day button
until the next desired day/block of days
you want to programme is flashing.
6. Repeat steps 3-5 until all days/block of
days have been programmed. Wait 15
seconds to automatically confirm or press
the
Home button. Move the slider to
RUN to return to Run Mode.
N.B. The copy button can be used in the 7
day setting to copy any chosen day to
the next day (e.g Monday to Tuesday or
Saturday to Sunday). Simply change the
program for that day, then push copy
repeatedly until all 7 days (if you so
wished) have been changed.
Setting the Operation
1. Switch the slider to PROG. Press either
the +/– button to move between ON/
OFF/AUTO/ALL DAY. Press the Next
button to move between 2 channels.
ON: Central Heating and Hot Water is
ON continuously
AUTO: Central Heating and Hot
Water will be switched ON and OFF in
accordance with set programmes
ALL DAY: Central Heating and Hot Water
will switch ON at the first ON and switch
OFF at last OFF
OFF: Central Heating and Hot Water will
be permanently OFF
2. Wait 15 seconds to automatically confirm
or press the
Home button. Move the
slider to RUN to return to Run Mode.
To Next Page
Loading...