Levante LEVPH750TPR - Selecting a Program; Changing User Program Settings; Copying 24-Hour Program; Terminating Weeks Programs

4.2 Selecting a program
Toselectanyoftheprograms:
1. Presstheprogramselectbutton6
2. Thecurrentselectedprogramwillbedisplayed
3. UsetheUp9andDown10buttonstoselecttherequiredprogram
4. Presstheprogramselectbutton6
5. Theprogramselectoptionwillterminateandtheselectedprogramwillbesavedandusedtocontrol
the panel heater
4.3 Changing the settings for the user program (UP)
Toprogramtheheatingsettingsforthe“UP”program:
1. Presstheprogramselectbutton6
2. Thecurrentselectedprogramwillbedisplayed
3. UsetheUp9orDown10buttonstoselectthe“UP”program
4. PresstheProgbutton11
5. Monday’s24hourprogrammingscreenwillbedisplayed
6. The24hourprogramisdividedintohalfhourtimeslotsandeachhastobeprogrammed.Thereare
2optionsforeachhalfhourslot.ThesecanbesettoeitherhighlevelusingtheUPbutton9orlow
levelusingtheDOWNbutton10.
7. Whenallthe24hourtimeslotshavebeenprogrammedthetimerdisplaywillshow00:00
8. Presstimerbutton8andthenext24hourperiodwillbedisplayed.
9. Repeatsteps6to8untilall7dayshavebeenprogrammedwiththerequiredheatingsettings.
10. After5secondstheprogrammingscreenwillendandtheusersettingssaved.The“UP”programwill
berunwiththecurrentdaysettingsdisplayed.
4.4 Copying 24-hour program
Inthe“UP”programa24hourperiod’ssettingscanbecopiedfrom1daytothenexttosavehavingto
program each day individually.
1. Repeatsteps1to7abovetoprograma24hourperiod
2. Presscopybutton7
3. Presstimerbutton8
4. Presscopybutton7
5. The1
st
days settings are now copied into the 2
nd
day
6. Repeatsteps2to4forallsubsequentdaysthataretohavethesamesettings.
4.5 Terminate the week’s programs
PresstheProgrammingbutton(11)againtoterminatetheweek’sprograms,whenyounishthe
programmingfromMondaytoSunday.Thecontrolpanelwillnowshowthecorrectday,programtype
UP,thetemperaturecorrespondingredorgreenlight,andtheprogramsequenceforthepresentday.
Theprogramisnowactiveandrunning.Theprogramisstoredandwillnotbelostwhenafactory-set
program is used.
5 Locking the control panel
5.1 Electronic locking
Pressbutton(9)and(10)atthesametimeuntilthepadlocksymbolappearsonthedisplay.Allthecontrol
functionswillnowbelockedandbuttonswillnolongeroperate.Dothesamebuttonsequenceagainto
unlockthecontrolsandthepadlocksymbolwilldisappear.
5.2 Mechanical locking
ThecoverovertheLCDdisplaycanberemoved/lockedinplacewiththescrewlocatedinthecover.