LevelOne FCS-3000 - Page 69

66
1 Send audio from active client to all other
clients (only possible in Half-duplex)
0 Use external microphone in source (r/w)
1 Use build microphone
0 Disable low bandwidth environment
support
lowbandwidth
(r/w)
1 Improve in low bandwidth environment
0 Disable enableaec
(r/w)
1 Enable
Group: Image
NAME VALUE DESCRIPTION
brightness
(r/w)
<-5 ~ 5> Adjust brightness of image according to
mode settings. <0>
saturation
(r/w)
<-5 ~ 5> Adjust saturation of image according to
mode settings. <0>
contrast
(r/w)
<-5 ~ 5> Adjust contrast of image according to
mode settings. <0>
hue
(r/w)
<-5 ~ 5> Adjust hue of image according to mode
settings. <0>
Preview Apply the parameter of image but not
save
Restore Restore the last saved image parameters
mode
(w)
Save Directly save the adjust image
parameters
Group: CCD
NAME VALUE DESCRIPTION
0 Turn off AES autoelectronicshutter
(r/w)
1 Turn on AES
0 Turn off backlight compensation
1 Turn on backlight compensation
enableblc
(r/w)
1 Set auto gain control to MAX level
Preview Apply the parameter of image but
not save
mode
(w)
Restore Restore the last saved image
parameters