Need help?Do you have a question about the LevelOne FCS-3081 and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| Audio | Two-way Audio |
| Network Interface | 10/100 Mbps Ethernet |
| Placement | Indoor |
| Connectivity technology | Wired |
| PTZ control | No |
| Lens Type | Fixed |
| Focal Length | 3.6mm |
| Aperture | F2.0 |
| Day/Night | Yes |
| Night Vision | Yes |
| Video Compression | H.264 |
| Power Supply | PoE or 12V DC |
| Minimum Illumination | 0 Lux |
| Video Output | No |
Lists hardware and software requirements for camera operation.
Instructions for installing the IP Dome Camera.
Guides on connecting power and network cables.
Details the process of mounting the camera on a hard ceiling.
Instructions for installing the camera in a 4S electrical box.
Guide on using the Device Search software for camera discovery.
Overview of the camera's web interface and its main tabs.
Overview of configurations available under the System tab.
Overview of video and audio streaming configuration options.
Overview of camera image parameter adjustment options.
Managing user accounts, privileges, and root password for security.
Configuring IP address, subnet mask, gateway, and UPnP settings.
Enabling automatic IP address assignment via DHCP.
Manually configuring a static IP address for the camera.
Configuring alarm inputs, outputs, and triggered actions for events.
Enabling the alarm function and selecting alarm input type.
Defining actions for alarm or motion events (e.g., email, FTP, SD card).
Configuring motion detection sensitivity, areas, and triggered actions.
Defining specific areas within the video feed for motion detection.
Adjusting sampling interval, detection level, and time interval.
Specifying actions when motion is detected (recording, notifications).
To Next Page