4.3.8 Motion Detection
Motion Detection function allows detecting suspicious motion and triggering
alarms when motion volume in the detected area reaches/exceeds the
determined sensitivity threshold value.
In the Motion Detection setting page, there is a frame (Motion Detection
Window) displayed on the Live View Pane. The Motion Detection Window is for
defining the motion detection area. To change the size of the Motion Detection
Window, move the mouse cursor to the edge of the frame and draw it
outward/inward. Moving the mouse to the center of the frame can shift the frame
to the intended location.
Up 10 Motion Detection Windows can be set. Press the “add” button under the
Live View Pane to add a Motion Detection Window. To cancel a Motion
Detection Window, move the mouse cursor to the selected Window, and click
on the “delete” button.
To Next Page
Loading...
