LevelOne FCS-3081 - 4.3.3 Network Configuration; DHCP IP Address Assignment

32
4.3.3 Network
Click <Network> in the left column, and the page will display as shown below.
Users can choose to connect to the IP Camera with fixed or dynamic (DHCP) IP
address. The IP Camera also provides PPPoE support for users who connect to
the network via PPP over Ethernet (PPPoE).
Get IP address automatically (DHCP)
The camera’s default setting is “Use fixed IP address”. Please refer to the
previous section 4. Accessing Camera for login with the default IP address.
If select “Get IP address automatically”, after the IP Camera restarts, users
can search it through the installer program: DeviceSearch.exe, which can be
found in “DeviceSearch” folder in the supplied CD.
NOTE: Please make the record of the IP Camera’s MAC address, which
can be found in the label of the camera, for identification in the future.