Password/Key
Enter the password or key required by the DDNS provider for authentication.
4.3.5 Mail
The Administrator can send an e-mail via Simple Mail Transfer Protocol (SMTP)
when motion is detected. SMTP is a protocol for sending e-mail messages
between servers. SMTP is a relatively simple, text-based protocol, where one or
more recipients of a message are specified and the message text is transferred.
The configuration page is shown as follows:
Two sets of SMTP can be configured. Each set includes SMTP Server, Account
Name, Password and E-mail Address settings. For SMTP server, contact your
network service provider for more specific information.
To Next Page
Loading...
