˙User Name: You must be input the default administration user name, admin as login user
name.
˙Password: The default password is empty. After setup password is completed from the
print server, you shouldn’t forget this password.
TCP/IP Setup:
1. Click Setup, it then appears the sub-menu.
2. Click TCP/IP, it then as shown in the following picture.
DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a
DHCP/BOOTP server on your network. This option allows the print server
to obtain IP-related settings automatically from your DHCP server.
To Next Page
Loading...
