LevelOne FVT-2202 - DIP-Switch

7
DIP-switch
The DIP-switch is used to configure operation mode for LLF (Link
Lost Forwarding) and operation mode for UTP/Fiber port. The
default value of DIPswitch is OFF.
Fast Ethernet Module
No
Status
Description
1
ON
LFP is Enable
OFF
LFP is Disable
2
ON
Flow Conntrol Enable
OFF
Flow Conntrol Disable
Gigabit Ethernet Module
No
Status
Description
1
ON
LFP is Enable
OFF
LFP is Disable
2
ON
Flow Conntrol Enable
OFF
Flow Conntrol Disable