The Lower panel contains a history of all remote devices seen on the computer over a certain
period of time. All devices that were on the powerline network are listed here along with a few
other parameters. Devices that are active on the current logical network will show a transfer rate
in the Rate column; devices on other networks, or devices that may no longer exist are shown
with a “?” in the Rate column. The following remote device information is available from the
diagnostics screen:
- Device Alias Name
- Device MAC Address
- Device Password
- Device Last known rate
- Device Last Known Network name
- HomePlug chipset manufacturer name
- Date device last seen on the network
- MAC Firmware Version.
The diagnostics information displayed may be saved to a text file for later use, or can be printed
for reference for a technical support call. Devices, which are not part of the network anymore,
can be deleted using the delete button. A dialog window pops up with a confirmation message if
we try to delete a device whose password has been entered.
3.4 About Screen
The About screen shows the software version.
Figure 3-8: About dialog screen
To Next Page
Loading...
