3.3.2.3 Email Alert
This device can also export system logs via sending emails to specific recipients. The
items you have to setup include:
1. Setting of Email alert: Check if you want to enable Email alert (send syslog via
email).
2. SMTP Server: Port: Input the SMTP server IP and port, which are connected
with ':'. If you do not specify port number, the default value is 25.
For example, "mail.your_url.com" or "192.168.1.100:26".
3. SMTP Username: Enter the Username offered by your ISP.
4. SMTP Password: Enter the password offered by your ISP.
5. E-mail Addresses: The recipients are the ones who will receive these logs. You
can assign more than 1 recipient, using ';' or ',' to separate these email
addresses.
6. E-mail Subject: The subject of email alert is optional.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.
3.3.3 System Tools
3.3.3.1 Change Password
To Next Page
Loading...