not affected by Association control.
3.3.3.5 Miscellaneous Items
Remote Administrator Host/Port
In general, only Intranet user can browse the built-in web pages to perform administration task. This feature
enables you to perform administration task from remote host. If this feature is enabled, only the specified IP
address can perform remote administration. If the specified IP address is 0.0.0.0, any host can connect to this
product to perform administration task. You can use subnet mask bits "/nn" notation to specified a group of
trusted IP addresses. For example, "10.1.2.0/24".
NOTE: When Remote Administration is enabled, the web server port will be shifted to 88. You can change
To Next Page
Loading...
