PortableCapture Pro software
Software installation
Insert the installation CD into your CD drive. The Main Menu window will be displayed. Select
PortableCapture software to install the PortableCapture Pro application. Keep in mind that a system
restart will be required during installation.The installation CD contains a copy of this User Guide,
which you can read by clicking the corresponding entry in the Main Menu.
First steps
Connect the microscope to your PC with a USB cable and run the PortableCapture Pro application.
A pop-up message will warn you if the microscope is not connected to the PC.
Toolbar icons
Capture an image
Start and stop
video recording
Sequence capture (you can set
the time to begin capturing
images or videos, interval
between them, video duration
and the number of images
or videos to be captured)
Full screen mode.
To exit full screen mode,
press Escape your keyboard
or double-click anywhere
on the screen
4
To Next Page
Loading...
