To Next PageTo Next Page
Need help?Do you have a question about the Levenhuk Wezzer PLUS LP50 and is the answer not in the manual?
Instructions for installing batteries and setting up the base station.
Guide on setting up a remote sensor, including channel selection.
Steps and tips for establishing a reliable connection between sensors and the base station.
Instructions on how to set the alarm time and toggle it on or off.
How to activate the snooze feature when the alarm is ringing.
How to switch units and interpret display values, including out-of-range indicators.
Explanation of the symbols used for weather forecasting.
Understanding the pictorial indicators for indoor comfort levels.
General| Type | Weather Station |
|---|---|
| Wireless sensor | Yes |
| Housing material | Plastic |
| Accuracy (temperature) | ±1 °C |
| Resolution (humidity) | 1% |
| Resolution (temperature) | 0.1 °C |
| Power Supply | 2 x AAA batteries (for main unit), 2 x AA batteries (for sensor) |
| Built-in sensors | hygrometer, thermometer |
| Location | Indoor/Outdoor |
| Indoor temperature measurement range | 0°C to +50°C |
| Outdoor temperature measurement range | -20...+60 °C |
| Indoor humidity measurement range | 20% to 95% |
| Outdoor humidity measurement range | 20% to 95% |
| Wireless sensor range | 100 m |
| Power source | 2 x AAA batteries (for main unit), 2 x AA batteries (for sensor) |
| Accuracy (humidity) | ±5% RH |
| Temperature Measurement Range | -20...+60 °C |
| Humidity Measurement Range | 20% to 95% |
| Measurement range (humidity) | 20% to 95% |
