Leviton 476TM-612 User Manual

Twist & Mount Patch Panel
IMPORTANT
INSTRUCTIONS
1.Read and understand all instructions. Follow all warning
and instructions marked on the product.
2.Do not use this product near water-e.g., near a tub, wash
basin, kitchen sink or laundry tub, in a wet basement, or
near a swimming pool.
3.Never push objects of any kind into this product through
openings, as they may touch dangerous voltages.
4.SAVE THESE
INSTRUCTIONS.
SAFETY INFORMATION
1.Never install communications wiring or components during
a lightning storm.
2.Never install communications components in wet locations
unless the components are designed specically for use in
wet locations.
3.Never touch uninsulated wires or terminals unless the
wiring has been disconnected at the network interface.
4.Use caution when installing or modifying communications
wiring or components.
5.To prevent electrical shock, each opening must be lled
with a module.
CAT 5e CAT 5e CAT 6 CAT 6
CAT 6 CAT 6
Additional Insert Options
Call 1-800-824-3005
Additional Insert Options
Call 1-800-824-3005

Leviton 476TM-612 Specifications

General

Brand	Leviton
Model	476TM-612
Category	Cables and connectors
Language	English

Summary

Important Instructions

General Usage Guidelines

Covers reading manuals, avoiding water, preventing object insertion, and saving instructions.

Safety Information

Electrical and Environmental Safety

Precautions against lightning, wet conditions, uninsulated wires, and electrical shock.

Introduction to Twist & Mount Patch Panel

Application Overview

Details the panel's purpose for connecting telephone and data services in homes and offices.

Package Contents

Required Tools

Getting Started

Planning Cable Routing

Guidance on planning cable routing to determine distribution panel needs.

Defining Wire Locations

Instructions on labeling wires with location or ID numbers for mapping.

Organizing Wires

Steps for separating voice and data wires for termination ease.

Installation Process

Mounting the Patch Panel

Procedure for mounting the panel within the enclosure using installation hooks.

Cable Termination Procedures

Using the Plastic Tool

Step-by-step guide for using the provided plastic tool for wire termination.

Using the Punch Tool

Instructions for using a professional punch tool for wire termination.

Panel Mounting

Labeling Procedure