Do you have a question about the Levo SW LTD and is the answer not in the manual?
Fork | 150mm travel |
---|---|
Charger | Custom charger, 42V, 4A |
Rear Derailleur | SRAM Eagle, 12-speed |
Shifters | SRAM Eagle trigger, 12-speed |
Chain | SRAM Eagle, 12-speed |
Crankset | Praxis, custom offset |
Chainrings | 32T |
Brakes | SRAM, hydraulic disc |
Tires | Butcher, GRID TRAIL casing, GRIPTON compound, 29x2.6" |
Seatpost | 30.9mm |
Top Speed | 20 mph |
Gears | 12 |
Refers to the written warranty provisions provided with the bicycle.
Explains warning, caution, and info symbols for safety and damage.
Specifies the Levo's intended purpose and usage conditions.
Defines the Levo as an EPAC and outlines relevant regulations.
Provides advice for efficient riding, component care, and battery range.
Outlines essential pre-ride checks for safety and system functionality.
Details the purpose and location of the removable serial number sticker.
Addresses safety and handling considerations for riding with children.
Specifies headset bearing types and installation notes.
Covers seatpost installation requirements, minimum/maximum insertion.
Details the speed sensor and its maintenance.
Assembly instructions and torque specifications for the stem.
Information on the dropper housing guide and its mounting.
Information on obtaining genuine replacement parts and accessories.
Overview of the TCU 1 display and its functions.
Overview of the TCU 2 display, its features, and customization.
Details the TCU 2 handlebar remote controls and functions.
Lists and describes the available motor support modes.
Details how to change support modes using the TCU 1 remote.
Covers Bluetooth and ANT+ connectivity for sensors and apps.
Lists TCU 1 error codes, their meanings, and troubleshooting steps.
Procedures for performing a factory reset on TCU 2.
Overview of the Mission Control app's capabilities and features.
Steps to download and install the Mission Control application.
How to customize screen layouts and displayed data on TCU 2.
Guidelines for safe charging and usage of the Levo battery.
Recommendations for storing the bicycle and battery properly.
Instructions for environmentally friendly disposal of batteries and chargers.
Technical specifications for the Levo battery models.
Technical specifications for the Levo bicycle charger.
Lists general technical specifications for the Levo bicycle.
Details maximum compatible sizes for fork, tire, and chainring.
Lists necessary tools for assembly, maintenance, and adjustments.
Provides a table of torque specs for various bolts and components.
Lists specifications for spacers, axles, and bolts with torque values.
Steps for adjusting the Horst pivot flip chips for geometry changes.
How to adjust the head tube angle using headset cups.
Guide to setting proper air pressure in the bicycle's suspension shock.
Guide on adjusting suspension shock compression damping settings.