19
9. MISSION CONTROL
The Specialized Mission Control App enables you to further enhance your Levo ride
experience to your personal needs.
Most importantly, the app allows you to customize motor characteristics, diagnose the bicycle
system, record rides, see real-time ride data, and control bicycle range.
INFO Functionality of the Mission Control App is subject to change without
notice. Make sure you have the latest version of the app installed on your
mobile device. Refer to the app itself for the latest information and features.
9.1. MISSION CONTROL FUNCTIONS
The following information will help you understand how to get the most out of your Turbo with
our Mission Control App.
4
5
3
2
1
9.1
8.15. CHANGING THE INTERNAL BATTERY (TCU 1 ONLY)
-
+
B
TX 10
7
i
n
-
l
b
f
0
.
8
N
m
A
8.15
Fig. 8.15
The coin cell battery is located behind the rubber seal on the front of the TCU 1. To access
the battery compartment you will need to remove the TCU 1 from the bicycle.
To replace the CR 1620 coin cell battery, use tweezers to pull the battery out. When
installing a new battery, make sure it is fully inserted.
INFO: The TCU 2 does not have an interchangeable battery, the battery is kept
charged via the main internal battery and will not need to be replaced.
INFO: The Micro-USB (TCU 1) or the USB-C (TCU 2) port below the battery
port is for Authorized Specialized Retailer and Specialized Service Center
diagnostic use only. Please ensure the USB rubber seal is always correctly
pressed in and firmly closed.
WARNING: Do not use metallic tweezers to re-insert the battery as this will
lead to the battery short circuiting.
To Next Page
Loading...
Need help?
General
